Child pages
  • KB145588676: Imaging Engine - How to create a Concentric screen in Screen Manager
Skip to end of metadata
Go to start of metadata

 

Description

Concentric screens on Nexus was setup and used from Nexus Expose tickets.

In Imaging Engine, screens are used (selected) from an Expose ticket. However, as setup of some screens are not part of the base screens, it is done from a dedicated screening application (Screen Manager, HD Flexo). So, not only the way of setup is changed but also the screen format.

Nexus customers having Concentric screens, will get Screen Manager 14 with a permanent license!

Screen Manager 14 is part of the Imaging Engine 14 products installer. So, when you have the license activated, the Screen Manager application will be installed next to your Imaging Engine rip.

Procedure

Check the Concentric Screen settings in your Nexus Worklow

Open your Nexus workflow and check the settings in Rasterize Separations which is shown in the example screenshot given below:

Open Screenmanager 14.x on the Imaging Engine PC and follow the steps given below (steps are also mentioned in the screenshot):

  1. Click the + button to make a new screen.
  2. Enter a name, e.g.: Concentric.
  3. Select your original dot - Paragon, e.g.; Paragon round.
  4. Click the Concentric tab and switch on Concentric screening.
  5. Define the following settings for your Concentric:
    1. Ring Thickness
    2. Space Thickness
    3. Grade
    4. Select the Pixel Area radio button for Screen levels Sort On.
    5. In the Ruling dependency drop-down menu, select not ruling dependent option.
    6. Uncheck the Restrict to Flexo Angles only checkbox.
    7. Uncheck the Restrict ruling from checkbox.
  6. Define the resolution.
  7. When all settings are done, click the Save button. This will create your Concentric screen in the bg_data_screens_v020 folder (can take a while because the screentiles are saved on your harddisk).
  8. When finished, you can use the Concentric screen in the Imaging Engine tickets. Go to the Separations tab and select the SCR03 --> Concentric in the Dot field.
Article information
Applies to

Imaging Engine 14.x

Screen Manager 14.x

Created23-Dec-14
Last revised 
AuthorDOCA
CW Number 
Contents