Esko Logo Back to Esko Support
Choose your language for a machine translation:
Skip to end of metadata
Go to start of metadata

 

Summary

When creating a layout that has a front and back, the image within the die on one side is not rotating or flopping correctly.

Symptoms

When the PDF of a front and back of a sign are viewed in Adobe® Acrobat®, they appear to be set up correctly.

When a layout is created in i-cut Layout, the artwork is correct but the cut lines are not.

 

Solution

This behavior is 'normal' in i-cut Layout. Recto/verso graphics need to be defined in such a way that the back is mirrored over a vertical axis. In this case, the graphic seems to be mirrored over the horizontal axis. This is not supported.

Workaround

  1. In i-cut Layout, go to the Station view and rotate both the front and back of the artwork by 90 degrees.
  2. Create new layouts.
Article information
Applies to

i-cut Layout all versions

Created11-Feb-16
Last revised 
AuthorSACO
Case Number

586624

Contents