Description
The following error appears:
Error 3508 - Check vib. Motor fuse
The system has detected that there is no current draw in the vibrating knife motor circuit when it is energized.
Global Checks
There are no global checks.
Machine Specific Checks
XL/XN/DCM/VL
- Make sure the vibrating knife cable is plugged in.
- Check for a broken wire inside the plug at the end of the cable coming out of the vibrating knife.
- More recent tables have fuses located on the toolhead as shown the photograph below. Check the fuse (2 amp).
FLEXIHEAD |
POWERHEAD AND MULTICUT |
|---|
XE
- Unmount the tool and check the connector for bent or broken pins.
- Remove the cover from the tool and check the fuse (2 amp nano fuse).
| Article information | |
|---|---|
| Applies to | Kongsberg XL Kongsberg XN Kongsberg XE Kongsberg DCM Kongsberg VL |
| Created | 23-Oct-13 |
| Last revised | |
| Author | MCM |
| Problemlog Number | |
Contents
Overview
Content Tools
ThemeBuilder
Tasks
Bookmarks