Esko Logo Back to Esko Support
Choose your language for a machine translation:
Skip to end of metadata
Go to start of metadata



Instructions for adding a new plate type in 12X Grapholas Merge.


  1. In Merge, click Edit > Edit Plate List.
  2. In Plate Type, select Plate.
  3. For Drive:, select New and then click the Next button.
  4. For Brand, select DuPont and for the Plate select DFR 1.70 (067). Make sure you select the correct thickness.
  5. Click Next.
  6. Leave default Name, Thickness, Distortion and click Next.
  7. If you right-click the Plate List in Merge, it will give the Laser Energy 3.2 default value. Use either the default value or the one set up by Mgf.
  8. Click Next.
  9. Click Finish. This saves the plate.
  10. You now have a new plate in your Plate List drop down menu in Merge. If you go to that plate and right-click, it will have all the information you entered.

To edit any of those plates, follow the above procedure and in step 3 for Drive: select Edit and click through the menu and make the changes. When done, click the Finish button.




Article information
Applies to



Last revised 
Problemlog Number