- This line was added.
- This line was removed.
- Formatting was changed.
The following are the minimum system requirements for Automation Engine 18.1. Exceeding these requirements will in most cases lead to a performance increase. Running Automation Engine 18.1 on a system that does not meet these requirements is not supported.
The Automation Engine Server and any Assistant(s) server must be dedicated servers on which no other software (including other Esko applications such as FlexRip or FlexProof) is running.
Minimum Requirements - Server
|Minimum System Requirements for Automation Engine 18.1 (Server)|
|Your installation type||Personal||10 clients||20 clients||50 clients2 processing channels||4 processing channels||8 processing channels|
|Processor type and speed|
2 processor cores
4 processor cores
6 processor cores
10 processor cores
|RAM||12 GB||16 GB||22 GB||34 GB|
|Additional requirements for Viewing and QA Module|
For every two simultaneous viewing sessions, add one processor core and 3 GB RAM. Do not configure more than 24 simultaneous viewing sessions per Automation Engine master server.
To give your Automation Engine with 50 clients system viewing capabilities on unprepared files, you should add additional hardware resources for viewing. If you expect 8 simultaneous viewing sessions (8 single file sessions or 4 compare sessions), add an additional 4 processor cores and 12 GB RAM to the standard requirements.
For a 50 client system on a single physical machine, this would require a 14 processor core machine with 46 GB of RAM.
|Additional requirements for inspection tasks powered by Global Vision|
Add 8 GB of RAM if inspection tasks are expected to run.
|Additional requirements for Gang Run Printing Module|
Add one processor core and 1.5 GB RAM per Gang Run Printing session configured and in use.
To add Gang Run Printing capabilities to a 50 client system, you should add additional hardware resources for concurrent Gang Run Printing. To enable four Gang Run Printing sessions for instance to perform automated nesting calculations in this case, four additional processor cores and 6 GB extra RAM are needed.
For a 50 client system on a single physical machine, this would require a 14 processor core machine with 40 GB of RAM.
Knowing the exact customer situation and Gang Run Printing requirements (e.g.: number of substrates) helps in more accurately determining the additional hardware resources needed for nesting.
|Network||10/100/1000 Base-T Ethernet, TCP/IP v4 protocol. TCP/IP version 6 is not supported.|
|Graphics and video||Minimum 1280 x 1024 screen resolution, true color depth.|
Automation Engine supports virtualization on:
Hardware connections, including dongles, proofers, spectrophotometers and others may work, but are not supported. Customers should verify hardware support through their virtualization support channels.
All Esko applications running on Windows OS can use data that is available on network shares. For Automation Engine to perform according to expectations, these shares need to be on NTFS volumes on Windows file servers (with no folders enabled for case-sensitive file names). We recommend to use Windows Server 2008 R2, Windows Server 2012, Windows Server 2012 R2 or Windows Server 2016 as file server (preferably the same version as for the Automation Engine server).
Upgrading from prior versions of Automation Engine
Upgrades of existing Automation Engine 16 and Automation Engine 18 environments should run on existing hardware with comparable performance for the same functionality.
However, the hardware requirements as for new installations should be encouraged for optimum performance.
Compatibility with HP SmartStream Print Servers
Automation Engine 18.1 is compatible with HP SmartStream Labels and Packaging Print Server 5.2.1 and newer.
Supported Operating Systems
Recommended operating systems are highlighted in the tables below.
If an operating system is not listed in the tables below, it is not supported. Do not try to install Automation Engine Server on a computer running an unsupported operating system.
Windows Server 2019
|Windows Server 2019 Standard|
|Windows Server 2019 Datacenter|
|Windows Server 2019 Essentials|
Windows Server 2016
|Windows Server 2016 Standard|
|Windows Server 2016 Datacenter|
|Windows Server 2016 Essentials|
|Windows Storage Server 2016|
Windows Server 2012 R2
|Windows Server 2012 R2 Standard|
|Windows Server 2012 R2 Datacenter|
|Windows Server 2012 R2 Essentials|
|Windows Server 2012 R2 Foundation|
|Windows Storage Server 2012 R2 Workgroup|
|Windows Storage Server 2012 R2 Standard|
Windows Server 2012
|Windows Server 2012 Standard|
|Windows Server 2012 Datacenter|
|Windows Server 2012 Essentials|
|Windows Server 2012 Foundation|
|Windows Storage Server 2012 Workgroup|
|Windows Storage Server 2012 Standard|
Windows Server 2008 R2
|Windows Server 2008 R2 Standard||(*)(**)|
|Windows Server 2008 R2 Enterprise||(*)|
|Windows Server 2008 R2 Datacenter||(*)|
|Windows Small Business Server 2008 R2|
|Windows Server 2008 R2 Foundation|
|Windows Web Server 2008 R2|
|Windows Server 2008 R2 HPC Edition|
Windows Server 2008 R2 (all editions) is not supported for new installations as of Automation Engine 18.0.
Upgrading an existing Automation Engine Server Automation Engine 18.1 is still possible on Windows Server 2008 R2, but this will become unsupported soon (for later versions) as well.
Note that Windows Server 2008 R2 Standard Edition only allows for maximum 32 GB of physical memory, which may rule it out for larger AE configurations.
Unsupported Operating Systems
Windows Server 2008 R2 ( without Service Pack 1 )
Note Windows 2008 R2 with SP1 is a supported OS for upgrades only (see above).
- Windows Server 2008 (all editions)
- Windows Server 2003 (all editions)
- Windows 2000 (all editions)
- Windows 10 (all editions)
- Windows 8.1 (all editions)
- Windows 8 (all editions)
- Windows 7 (all editions)
- Windows Vista (all editions)
- Windows XP (all editions)
Operating Systems to become unsupported soon
- Windows Server 2008 R2 (all editions)
For more information and advice, please see the chapter Pre-Install IT Requirements Guide in the Automation Engine 18.1 Complete Manual, which is also available as
Automation Engine Server