ArtPro may run slowly when working over a network/local network. This article highlights some likely causes and offers possible solutions.
Symptoms include, but are not limited to:
Likely causes include, but are not limited to:
The respective solutions are:
|SMB (Samba)/CIFS protocol issue||Upgrade the Mac OS X system on your workstation to Mac OS X Lion or higher. |
These versions contain important enhancements to the SMB/CFIS protocol.
|Slow network/local network||Ask your IT department to optimize and speed up the network/local network.|
If ArtPro starts up slowly, it's very likely that a slow network/local network is the root cause.
This is especially the case if you've configured ArtPro to:
As a workaround, you can manually disable the connection to:
Only disable connections which you don't need!
To manually disable network licenses, follow the steps given below:
To manually disable the connection to Shuttle, follow the steps given below:
To manually disable the connection to Automation Engine, follow the steps given below: