Esko Logo Back to Esko Support
Choose your language for a machine translation:
Skip to end of metadata
Go to start of metadata



How to automatically measure the patches in the Esko Verification Tool?


  1. Check your measuring mode at the bottom of the Esko Verification Tool.

  2. If this mode is single you will have to measure all the patches individually. 

  3. If this mode is multi you will measure all the patches automatically. 

  4. To change this setting, navigate to File > Preferences > General. Here, you have to choose your measuring device.
  5. If you have a device with the two options (manual and automatical), you will be able to select a mode.
  6. Click OK and you can start the measuring.
This setting can not be changed while measuring. You will have to start over again if you want to change this setting.
Article information
Applies to

Esko Verification Tool all versions

Last revised 
Case Number00630235