Esko Logo Back to Esko Support
Choose your language for a machine translation:
Skip to end of metadata
Go to start of metadata



The following error is displayed on the screen:

Error 1034 - Z axis fuse is blown

This error appears when the table does not detect movement in the Z axis.

Global Checks

Check Z axis fuse. For machine specific locations, see below.

Machine Specific Checks

Click the appropriate links given below:


Check F1 & F2 fuses, replace if required.


 XL & XN

Check fuse F8 (located on the side of the Y amplifier, indicated with Z) and replace if necessary.


Check fuse Fz and replace if necessary.

Article information
Applies to

Kongsberg XL

Kongsberg XN

Kongsberg XE

Kongsberg XP

Kongsberg XPA

Last revised