Back to Esko Support

Skip to main content
assistive.skiplink.to.breadcrumbs
assistive.skiplink.to.header.menu
assistive.skiplink.to.action.menu
assistive.skiplink.to.quick.search

Skip to end of banner Go to start of banner

KB123471174: CDI - What should the relief depth on a finished 045 or 067 plate be?

Choose your language for a machine translation:

Created by Jules on Dec 31, 2021

Question

What should the relief depth on a finished 45mil or 67mil plate be?

Answer

Ideally you want a relief of 20mil. However measurements between 20mil - 24mil could be considered acceptable.

Article information
Applies to	CDI and Plates
Created	30 Sep 2014
Last revised
Author	CANI
CW Number

Contents