Esko Logo Back to Esko Support
Choose your language for a machine translation:
Skip to end of metadata
Go to start of metadata

 

Description

How should the Pixel+ pattern look like?

Procedure

Looking at the engraved plate, the following pictures show how a well adjusted CDI will engrave the different microcells at a boost value of 220%. The engraving is done in flattop mode on DuPont material with the FlatTop-Testchart_v7.len.

See below for the single pictures:

Article information
Applies to

CDI all Pixel+

Created02-DEC-13
Last revised 
AuthorCHJO
Problemlog NumberFTN165
Contents